Telemetry unit S0COM has been designed to collect data from various kinds of electronic meters communicating via serial port (RS485, RS232) or impulse interface (S0).
We customize the device to the requirements and needs of the customer.
The unit can use either LAN network (Ethernet) or wireless connection via GSM network to transfer measured data.
S0COM has been built on the platform of industrial PC. This allows us to very flexibly respond to the most demanding customer requirements.
Variable data transmission
Transmission of measured data is realized via either LAN network (Ethernet) or wirelessly due to integrated GSM modem (GPRS / SMS).
The S0 impulse inputs
The device has four impulse inputs, each containing five separate channels. These inputs allows connection of meters with impulse outputs (e.g. electrometers).
Serial interface RS485
Serial bus RS485 allows connection to external electronic meters and external regulation modules.
Serial interface RS232
The unit has three separated serial bus RS232 inputs designed to connect to electronic meters.
Integrated memory can be expanded via Compact Flash Card
Small dimensions and easy installation
The device was designed into a 6 module box with DIN rail mounting. It is possible to connect an external magnetic GSM antenna if needed.
Communication and control
The big advantage of S0COM is its ability to communicate and operate through its own software applications or possibility to integrate the communication into the customer’s existing systems.
|Power supply||DC 12 V ± 2 V|
|Current consumption||typical 350 mA
maximum 500 mA
peak 1,5 A
|Interface||Impulse port (5 binary inputs) – 4x
RS232 serial port – 3 x
RS485 serial port – 1 x
|GSM||Quad-Band 850/900/1800/1900 MHz
Class 4 (2 W @ 850/900 MHz)
Class 1 (1 W @ 1800/1900 MHz)
|Network interface||LAN (Ethernet)|
|Memory||Compact Flash Card|
|Dimensions (without GSM antenna)||105x90x60 mm (6 modules)|
|Weight (without GSM antenna)||226 g|
|Operating temperature||from -20 ° C to + 70 ° C|
We develop and manufacture the unit in Czech Republic. Quality of production and its components is our number 1 priority. Each produced piece undergoes strict quality control and is CE certified.