Special telemetry unit with solar charging designed for use in extreme conditions without power supply options.
Measuring module is integrated in the unit. Transmission of measured data is realized via the GSM network.
Designed for use in extreme conditions
Using special technologies we achieved a large range of operating temperatures from -40 ° C to + 85 ° C.
Installing a small-sized solid casing with high protection IP65 enables the application of the device into tight spaces and very humid environments.
Wireless data transmission
Transmission of measured data is realized via SMS or GPRS. The device can be configured and its firmware remotely upgraded through GSM network.
The power supply is ensured by a special built-in battery with a minimum life time of 10 years..
The built-in battery is automatically charged from a small solar cell with dimensions of 80x80mm.
Sophisticated power management and low power consumption allows measuring and data transmission even during long covering of solar cell (e.g. snow)
The system of warning SMS messages
The telemetry unit is also equipped with a system of warning SMS messages that are sent in case of the device theft, failure of the battery or malfunction of the solar panel.
Measuring module, which is a part of SOLARCOM unit, can be custom modified.
SOLARCOM can be used for example to measure critical points of corrosion-protection for pipeline system, flow and pressure measurement in pipes, monitoring of level and flow of water, temperature monitoring etc.
Communication and control
The great advantage of SOLARCOM is the ability to communicate and operate through own software applications or easy integration into customer’s existing systems.
|Power supply||Integrated special battery (minimum service life of 10 years)|
|Charging||A small solar panel (80x80mm)|
|GSM||Quad-Band 850/900/1800/1900 MHz
Class 4 (2 W @ 850/900 MHz)
Class 1 (1 W @ 1800/1900 MHz)
|Dimensions||55 x 118 x 77 mm|
|Degree of protection||IP65|
|Operating temperature||from -40 ° C to + 85 ° C|
We develop and manufacture the unit in Czech Republic. Quality of production and its components is our number 1 priority. Each produced piece undergoes strict quality control and is CE certified.